How Do I Refinish My Floor?

Are the older hardwood floors in your office starting to show their age? After years of foot traffic, spills, and more, hardwood flooring will eventually show signs of wear and tear. When this happens, you’ll know that it is time to refinish your aging hardwood floors to make them look like new again.

commercial floor cleaning miami

If you’ve never been through this process before, though, you may not know where to begin. If you want to learn all about how you can do this process yourself, you will find some great tips on getting started below. If you’d rather not have to deal with these steps on your own, you can always pick up the phone and dial commercial floor cleaning miami services to help you with your floor refinishing project.

Refinishing Your Floor

If you opt to try out the DIY (do it yourself) approach for refinishing the hardwood floors in your office, then you will find that it is really not that difficult when you have a good idea of what you should be doing. Use these tips to get you started:

1. Make sure you clean up the area first, and move any furniture out.

2. Prep your working area by using sandpaper to sand the room down, as well as any little areas that your buffer may not be able to reach up to.

3. Put a dust mask over your face, and get your buffer ready with a buffing pad. Move the buffer from left to right across your hardwood floor, making sure to follow the grain. You’ll find it easy to see the areas you’ve already worked in, since the old finish will quickly dissipate after it’s been buffed out.

4. After buffing, you should leave the room for at least 10 minutes to let the dust and powder in the room settle down. You can then come back, sweep the floor, and dry-tack the floor using a microfiber cloth, making sure to push it along the direction of the grain.

5. With a respirator on, go ahead and pour your finish into a container, and then begin brushing it along the floor slowly and carefully, following the grain. When finished, wait for at least three hours before coming to check on the floor. If needed, you can give the floor a recoating.

Wait at least one week, and you can put furniture and other items back. That’s it! Hopefully, you now have a good idea of how simple it can be to refinish your office’s hardwood floor and make it look great and inviting for anyone who comes in.

Read More